This is a 12v shift gate light designed and produced by us at BillyFab here in Texas for the Kawasaki Ridge.
It’s a no drill, no screw, no glue, plug-and-play light that grabs power off the keyed 12v power supply on the dash. If your machine doesn’t have that, run 12v power wherever you choose, to use the light.
Shipping will be provided a QR Code for an installation video.
WARNING:
BillyFab products are aftermarket accessories and are NOT designed, tested, or certified to OEM electrical specifications. BillyFab is not an electrical engineering firm, and no product is represented as meeting manufacturer or OEM electrical standards.
Any aftermarket electrical modification carries inherent risks, including but not limited to electrical failure, short circuits, overheating, melted wiring, fire risk, damage to the vehicle or components, and voided manufacturer warranties.
Customer assumes all responsibility and risk for installation, wiring, inspection, use, and continued maintenance of this product and agrees to ensure it remains in safe, proper operating condition at all times.
BillyFab 8.5" Gear Strap – Product Description
The BillyFab 8.5" Gear Strap is a compact, flexible strap designed for organizing, bundling, and managing off-road gear. Multiple straps may be used together to bundle or manage larger or bulkier items, making it easy to scale your setup as needed for everyday off-road use.
Common uses include bundling tools, grouping recovery accessories, managing hoses or cords, securing gloves or rags, and keeping frequently used items organized inside a UTV, truck, trailer, or garage.
This strap is intended for light-duty gear management only. It is not designed for load-bearing, safety, lifting, towing, recovery, or restraint applications. Using multiple straps does not change this intended purpose. As with any utility accessory, proper use and routine inspection are recommended to ensure continued performance.
Simple, reusable, and easy to deploy, the BillyFab 8.5" Gear Strap offers a practical, modular solution for organizing off-road equipment.
The Black do not glow in the dark.
The Glow in the Dark straps are a clear/white color in the daylight.
WARNING:
The BillyFab 8.5" Gear Strap is a non-load-bearing accessory intended for light-duty utility use only. This product is not rated, tested, or designed to support human weight or to function as a safety, restraint, or load-securing device.
The strap may stretch, degrade, or fail under tension, shock load, environmental exposure, or improper use. Failure may occur without warning.
This product must not be used for lifting, towing, tie-down of loads, climbing, fall protection, personal restraint, vehicle recovery, or any application where failure could result in injury, death, or property damage.
Customer assumes all responsibility for proper use, inspection, and continued condition of the product. By purchasing and/or using this product, the customer agrees that BillyFab is not liable for any injury, damage, loss, or failure resulting from misuse or unintended application.
2024-2025 Kawasaki Ridge Rear Door Prop QTY1
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
If you add another product to your order, FREE SHIPPING will automatically be applied.
Parked on a slant? Tired of wrenching on or loading your machine and the rear doors keep closing on you? Stuffing a rag in the door jamb gets old fast. Grab a set of these!
These are pliable, flexible, shock-absorbing rear door props that click into the hinge and will hold your rear door open while you’re busy. Just don’t forget to remove it when you’re ready to shut the door and ride! Toss them in the glove box and keep them handy when you need them!
INSTALLATION:
When clicked into the hinge, the BillyFab Rear Door Prop provides approximately 71mm of usable prop opening. This works with OEM rear door bump stops or the upgraded BillyFab 10mm rear bump stops.
Rotate the doors' rod clip out of the way (see photos). If you’re using OEM bump stops, simply push the rear door open slightly past where it naturally stops. That extra bit of opening makes it much easier to click the Door Prop into place on the hinge.
2024-2025 Kawasaki Ridge Rear Door Prop QTY2
Parked on a slant? Tired of wrenching on or loading your machine and the rear doors keep closing on you? Stuffing a rag in the door jamb gets old fast. Grab a set of these!
These are pliable, flexible, shock-absorbing rear door props that click into the hinge and will hold your rear door open while you’re busy. Just don’t forget to remove it when you’re ready to shut the door and ride! Toss them in the glove box and keep them handy when you need them!
INSTALLATION:
When clicked into the hinge, the BillyFab Rear Door Prop provides approximately 71mm of usable prop opening. This works with OEM rear door bump stops or the upgraded BillyFab 10mm rear bump stops.
Rotate the doors' rod clip out of the way (see photos). If you’re using OEM bump stops, simply push the rear door open slightly past where it naturally stops. That extra bit of opening makes it much easier to click the Door Prop into place on the hinge.
2024–2025 Kawasaki Ridge Rear Door Bump Stops QTY 2
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
If you add another product to your order, FREE SHIPPING will automatically be applied.
These 10 mm bump stops replace the factory 38 mm bump stops and allow the rear doors to open from approximately 50° to 70°. That’s a 40% increase in opening angle, and it makes it much easier to enter the rear seats.
Installation: Simply remove the factory jam nuts, remove the OEM bump stop, install the BillyFab bump stops in their place, and reinstall the jam nuts.
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
So if you add another product, it will automatically apply FREE SHIPPING.
__________________________________________________________________________
This is an aftermarket, customer-installed part that may alter the OEM function and/or travel of your vehicle/UTV door. Installation is performed at the customer’s own risk. Customer assumes all responsibility for proper installation, inspection, and continued safe use.
Modifying any vehicle or machine may void all or part of the manufacturer’s warranty. BillyFab is not responsible for any warranty voids or manufacturer claims/denials related to the installation or use of this product.
BillyFab is not liable for any damage, injury, loss, or failure resulting from improper installation, misuse, modification, or use outside of intended purpose. By purchasing and/or installing this product, customer agrees to release and hold harmless BillyFab from any and all related liability.
2024-2025 Kawasaki Ridge Utility Pocket Covers Black QTY6
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
If you add another product to your order, FREE SHIPPING will automatically be applied.
These are a rubberized hole plug that match the height profile of your BillyFab stake pocket covers.
INSTALLATION:
The round hole in your machine's OEM plastic and the corresponding round hole in the metal frame underneath is often unaligned. Tug a little on the machine’s plastic to help align those holes if needed to get the plug in. This is normal just fiddle with it and you'll get it in!
