2024–2025 Kawasaki Ridge Rear Door Bump Stops QTY 2
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
If you add another product to your order, FREE SHIPPING will automatically be applied.
These 10 mm bump stops replace the factory 38 mm bump stops and allow the rear doors to open from approximately 50° to 70°. That’s a 40% increase in opening angle, and it makes it much easier to enter the rear seats.
Installation: Simply remove the factory jam nuts, remove the OEM bump stop, install the BillyFab bump stops in their place, and reinstall the jam nuts.
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
So if you add another product, it will automatically apply FREE SHIPPING.
__________________________________________________________________________
This is an aftermarket, customer-installed part that may alter the OEM function and/or travel of your vehicle/UTV door. Installation is performed at the customer’s own risk. Customer assumes all responsibility for proper installation, inspection, and continued safe use.
Modifying any vehicle or machine may void all or part of the manufacturer’s warranty. BillyFab is not responsible for any warranty voids or manufacturer claims/denials related to the installation or use of this product.
BillyFab is not liable for any damage, injury, loss, or failure resulting from improper installation, misuse, modification, or use outside of intended purpose. By purchasing and/or installing this product, customer agrees to release and hold harmless BillyFab from any and all related liability.
2024–2025 Kawasaki Ridge Rear Door Bump Stops QTY 2
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
If you add another product to your order, FREE SHIPPING will automatically be applied.
These 10 mm bump stops replace the factory 38 mm bump stops and allow the rear doors to open from approximately 50° to 70°. That’s a 40% increase in opening angle, and it makes it much easier to enter the rear seats.
Installation: Simply remove the factory jam nuts, remove the OEM bump stop, install the BillyFab bump stops in their place, and reinstall the jam nuts.
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
So if you add another product, it will automatically apply FREE SHIPPING.
__________________________________________________________________________
This is an aftermarket, customer-installed part that may alter the OEM function and/or travel of your vehicle/UTV door. Installation is performed at the customer’s own risk. Customer assumes all responsibility for proper installation, inspection, and continued safe use.
Modifying any vehicle or machine may void all or part of the manufacturer’s warranty. BillyFab is not responsible for any warranty voids or manufacturer claims/denials related to the installation or use of this product.
BillyFab is not liable for any damage, injury, loss, or failure resulting from improper installation, misuse, modification, or use outside of intended purpose. By purchasing and/or installing this product, customer agrees to release and hold harmless BillyFab from any and all related liability.
Image 1 of 14
Image 2 of 14
Image 3 of 14
Image 4 of 14
Image 5 of 14
Image 6 of 14
Image 7 of 14
Image 8 of 14
Image 9 of 14
Image 10 of 14
Image 11 of 14
Image 12 of 14
Image 13 of 14
Image 14 of 14