Featured Products
This is for the RIGHT side dash mount, right of the steering wheel, below the parking brake. WITH mic slot.
2024-2026 Kawasaki Ridge Dash Mounted Radio Holder that specifically fits the belt clip on the Baofeng 5RM.
NO DRILL, NO MODIFICATION, NO HARDWARE NEEDED SIMPLY REMOVE THE EXISTING OEM DASH SCREW/FASTENER AND SIMPLY BOLT ON. The fastener is a JIS #3 or PH3 bit.
It MAY fit other radio belt clips, please see the measurements of the design to see if your radio works!
Radio Clip Opening is 25MM
Radio Mic Clip Opening 25MM
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
IMPORTANT INFORMATION:
These are made with amorphous thermoplastic polymer that withstands very high heat that may accumulate in the cab and inclement weather. As with all plastic components, these parts are considered consumable and will experience wear over time. Exposure to elements, vibration, and general use may contribute to eventual degradation. With proper use and reasonable care, they are expected to provide long service life; however, no guarantee is made regarding lifespan under all conditions.
BillyFab is not responsible for damage resulting from misuse, improper installation, or use outside the intended purpose.
THERE ARE NO RETURNS
This is a 12v shift gate light designed and produced by us at BillyFab here in Texas for the Kawasaki Ridge.
It’s a no drill, no screw, no glue, plug-and-play light that grabs power off the keyed 12v power supply on the dash. If your machine doesn’t have that, run 12v power wherever you choose, to use the light.
A QR Code to our installation video is included.
WARNING:
BillyFab products are aftermarket accessories and are NOT designed, tested, or certified to OEM electrical specifications. BillyFab is not an electrical engineering firm, and no product is represented as meeting manufacturer or OEM electrical standards.
Any aftermarket electrical modification carries inherent risks, including but not limited to electrical failure, short circuits, overheating, melted wiring, fire risk, damage to the vehicle or components, and voided manufacturer warranties.
Customer assumes all responsibility and risk for installation, wiring, inspection, use, and continued maintenance of this product and agrees to ensure it remains in safe, proper operating condition at all times.
2024-2026 Kawasaki Ridge Stake Pocket Covers Black QTY 12
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
IMPORTANT INFORMATION:
These parts are thin, cosmetic plastic debris covers and are not designed to be load-bearing. Do not place, stack, or secure items on top of them, as doing so may result in cracking, damage to retaining clips, or the covers becoming dislodged.
As with all plastic components, these parts are considered consumable and will experience wear over time. Exposure to elements, vibration, and general use may contribute to eventual degradation. With proper use and reasonable care, they are expected to provide long service life; however, no guarantee is made regarding lifespan under all conditions.
THERE ARE NO RETURNS
BillyFab is not responsible for damage resulting from misuse, improper installation, or use outside the intended cosmetic purpose.
2024-2025 Kawasaki Ridge Utility Pocket Covers Black QTY6
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
If you add another product to your order, FREE SHIPPING will automatically be applied.
These are a rubberized hole plug that match the height profile of your BillyFab stake pocket covers.
INSTALLATION:
The round hole in your machine's OEM plastic and the corresponding round hole in the metal frame underneath is often unaligned. Tug a little on the machine’s plastic to help align those holes if needed to get the plug in. This is normal just fiddle with it and you'll get it in!
IMPORTANT INFORMATION:
These parts are thin, cosmetic plastic debris covers and are not designed to be load-bearing. Do not place, stack, or secure items on top of them, as doing so may result in cracking, damage to retaining clips, or the covers becoming dislodged.
As with all plastic components, these parts are considered consumable and will experience wear over time. Exposure to elements, vibration, and general use may contribute to eventual degradation. With proper use and reasonable care, they are expected to provide long service life; however, no guarantee is made regarding lifespan under all conditions.
THERE ARE NO RETURNS
BillyFab is not responsible for damage resulting from misuse, improper installation, or use outside the intended cosmetic purpose.
2024-2026 Kawasaki Ridge Cargo Bed Rub Rail Bump Stop QTY2
No drill, no modification, no new hardware needed! Just bolt on!
These were designed by me to actually solve a problem I was having with my tool box. It was rubbing the rear plastic cargo liner to where eventually it’d rub a hole in it.
These are pliable, flexible, shock-absorbing material that sticks out just enough to help stop tall enough cargo like a tool box from rubbing the OEM bed material.
INSTALLATION:
See photos. Simply remove the factory fastener from the bed, install the BillyFab Cargo Bed Rub Rail into the slot and reattach the OEM fastener! No drill, no modification, no new hardware needed! Just bolt on!
2024–2025 Kawasaki Ridge Rear Door Bump Stops QTY 2
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
If you add another product to your order, FREE SHIPPING will automatically be applied.
These 10 mm bump stops replace the factory 38 mm bump stops and allow the rear doors to open from approximately 50° to 70°. That’s a 40% increase in opening angle, and it makes it much easier to enter the rear seats.
Installation: Simply remove the factory jam nuts, remove the OEM bump stop, install the BillyFab bump stops in their place, and reinstall the jam nuts.
FREE SHIPPING IN THE US FOR ANY ORDER OVER $13
So if you add another product, it will automatically apply FREE SHIPPING.
IMPORTANT:
This is an aftermarket, customer-installed part that may alter the OEM function and/or travel of your vehicle/UTV door. Installation is performed at the customer’s own risk. Customer assumes all responsibility for proper installation, inspection, and continued safe use.
Modifying any vehicle or machine may void all or part of the manufacturer’s warranty. BillyFab is not responsible for any warranty voids or manufacturer claims/denials related to the installation or use of this product.
BillyFab is not liable for any damage, injury, loss, or failure resulting from improper installation, misuse, modification, or use outside of intended purpose. By purchasing and/or installing this product, customer agrees to release and hold harmless BillyFab from any and all related liability.
Billy Richards III started BillyFab (Billy Fabricators) after selling his idea to individuals on FB and whew, it has been such a blast.
Located in Texas we make parts for your machines ourselves. We blessed for each and everyone of you, thank you for your support.
For those of you wondering, what products are coming next?
We’re just getting started…
our story
