If your machine is equipped with the roof-mounted storage cubby, you already know how frustrating it can be when the OEM rearview mirror contacts the cubby and limits both adjustment and field of view. Even without the cubby, some driving positions simply require a little more mirror adjustment.
That’s exactly what the BillyFab Kawasaki Ridge Rearview Mirror Extension Arm was designed to fix.
The BillyFab KawasakI Ridge Rearview Mirror Extension Arm replaces the OEM mirror arm and lowers the rearview mirror approximately 1 inch (26 mm), helping it clear the roof-mounted storage cubby while also providing additional adjustment range and an improved field of view.
Made from Acrylonitrile Styrene Acrylate, a strong, heat-tolerant, UV-resistant terpolymer, each arm is made by me right here in Texas, USA.
LISTEN FOLKS: The OEM arm is cast metal. The BillyFab arm is not. The product feels like an extremely tough plastic because, well, that’s essentially what it is. The arm is very strong for its intended purpose, but folks, anything can be broken. If you overtighten it, wrench on it excessively, or yank on the mirror hard enough, you can damage it just like you can damage the OEM components. Install it with common sense and use it as intended.
Detailed step-by-step installation instructions are included.
WARNING:
BillyFab products are aftermarket accessories and are NOT designed, tested, or certified to OEM specifications. BillyFab is not an engineering firm, and no product is represented as meeting manufacturer or OEM specifications.
Any aftermarket modification carries inherent risks, including potential damage to the vehicle or its components and the possibility of voiding manufacturer warranties.
The customer assumes all responsibility and risk for installation, wiring, inspection, use, and continued maintenance of this product and agrees to ensure that it remains in safe and proper operating condition at all times.
If your machine is equipped with the roof-mounted storage cubby, you already know how frustrating it can be when the OEM rearview mirror contacts the cubby and limits both adjustment and field of view. Even without the cubby, some driving positions simply require a little more mirror adjustment.
That’s exactly what the BillyFab Kawasaki Ridge Rearview Mirror Extension Arm was designed to fix.
The BillyFab KawasakI Ridge Rearview Mirror Extension Arm replaces the OEM mirror arm and lowers the rearview mirror approximately 1 inch (26 mm), helping it clear the roof-mounted storage cubby while also providing additional adjustment range and an improved field of view.
Made from Acrylonitrile Styrene Acrylate, a strong, heat-tolerant, UV-resistant terpolymer, each arm is made by me right here in Texas, USA.
LISTEN FOLKS: The OEM arm is cast metal. The BillyFab arm is not. The product feels like an extremely tough plastic because, well, that’s essentially what it is. The arm is very strong for its intended purpose, but folks, anything can be broken. If you overtighten it, wrench on it excessively, or yank on the mirror hard enough, you can damage it just like you can damage the OEM components. Install it with common sense and use it as intended.
Detailed step-by-step installation instructions are included.
WARNING:
BillyFab products are aftermarket accessories and are NOT designed, tested, or certified to OEM specifications. BillyFab is not an engineering firm, and no product is represented as meeting manufacturer or OEM specifications.
Any aftermarket modification carries inherent risks, including potential damage to the vehicle or its components and the possibility of voiding manufacturer warranties.
The customer assumes all responsibility and risk for installation, wiring, inspection, use, and continued maintenance of this product and agrees to ensure that it remains in safe and proper operating condition at all times.
Image 1 of 13
Image 2 of 13
Image 3 of 13
Image 4 of 13
Image 5 of 13
Image 6 of 13
Image 7 of 13
Image 8 of 13
Image 9 of 13
Image 10 of 13
Image 11 of 13
Image 12 of 13
Image 13 of 13
